Point-of-entry treatment
Whole-House Water Filtration in Palm Beach County
Whole-house filtration — also called point-of-entry treatment — is installed where water enters the building, so every fixture receives treated water. It is usually the starting point when a concern shows up throughout the property rather than at one tap: chlorine taste and smell in every shower, sediment reaching multiple fixtures, or staining that appears in more than one bathroom.
What this treatment does
- Treats water at a single location upstream of the plumbing, so showers, laundry and outdoor bibs are included.
- Commonly reduces chlorine or chloramine taste and odor using carbon-based media selected for the disinfectant in use.
- Can include a sediment stage to capture sand, grit and particulate that clog fixtures and appliances.
- Can be configured with additional stages, such as iron or hydrogen-sulfide treatment on well supplies.
What it does not do
- It is not the same as a drinking-water system. Whole-house carbon filtration does not perform the fine separation that reverse osmosis does for dissolved solids.
- It does not soften water. Hardness is a separate decision — see water softeners.
- No filtration system removes every contaminant. Reduction claims apply to a specific model, tested to a specific standard, at a specified flow rate — not to a whole product category.
- It is not a substitute for appropriate water testing or for the utility's own treatment and reporting obligations.
Suitability
Who might consider it
Suitability depends on the property and the supply, not on a general recommendation.
Common situations
- Households that notice taste, odor or sediment at more than one fixture.
- Properties on a private well where the source water needs treatment before it reaches the plumbing.
- Homeowners planning a renovation who want treatment designed in rather than added later.
- Owners of larger homes where flow rate and simultaneous fixture use matter to system sizing.
Information needed before selecting equipment
- Water source: municipal supply or private well, and which utility serves the property.
- Available water quality information — the utility's most recent annual water quality report, or well testing where applicable.
- Peak flow demand: fixture count, irrigation, pool auto-fill and number of occupants.
- Physical space at the point of entry, along with drain access and electrical availability for systems that backwash.
- Whether an existing system is in place and whether it can be serviced instead of replaced.
What affects installation
- Point of entry location, and whether it is in a garage, on an exterior wall, or in a mechanical space.
- Plumbing material and pipe size, plus space for a bypass so the property still has water during service.
- Drain availability for backwashing media, and local requirements for discharge.
- Permitting and inspection requirements, which vary by municipality.
- For any work requiring a licensed contractor, ClearCoast confirms the contracting arrangement in writing before scheduling.
Maintenance and ownership
- Media life depends on the media type, incoming water and volume used — not on a fixed calendar figure.
- Cartridge stages need periodic replacement; backwashing systems need a functioning control valve and drain.
- Bypass valves and pressure readings should be checked during service visits.
- A written maintenance expectation is provided with the recommendation so ownership cost is understood upfront.
What affects cost
- System type: cartridge-based versus backwashing tank systems.
- Sizing for the property's peak flow and occupancy.
- Number of treatment stages required by the water source and goals.
- Plumbing modifications, drain runs, electrical work and permitting.
- Ongoing media or cartridge replacement intervals.
Pricing
How ClearCoast pricing works
We don't publish one-size prices because installed cost depends on your property, not on a product page. Every recommendation ends in a written quote you can review before anything is scheduled.
The cost factors for this service
- System type: cartridge-based versus backwashing tank systems.
- Sizing for the property's peak flow and occupancy.
- Number of treatment stages required by the water source and goals.
- Plumbing modifications, drain runs, electrical work and permitting.
- Ongoing media or cartridge replacement intervals.
How you get a real number
- You request a consultation and tell us the property type, water source and what prompted the enquiry.
- We confirm the serving utility for your address and review the available water quality information.
- We assess the installation conditions — point of entry, plumbing, space, drain and electrical — on site or from clear photos.
- You receive a written quote separating equipment, installation scope and expected maintenance, valid for a stated period.
- Nothing is scheduled until you approve the written quote; changes to scope are re-quoted, not assumed.
Your written quote lists the equipment, the installation scope, and the expected maintenance schedule separately, so you can compare it against any other proposal. If you would like to discuss payment options, mention it during your consultation and we will confirm what is currently available in writing. Read the installation cost guide for the full list of variables, or request your quote.
Equipment
HALO Water Systems — our main product line
ClearCoast's main product line is HALO whole-house water treatment equipment. HALO designs and manufactures its own valves, tanks and media for whole-home filtration, water softening and conditioning. Additional product lines are added as the catalogue is confirmed.
Model-specific performance and certification documentation is being collected. Until a model's data sheet is on file, we describe what a technology generally does rather than quote reduction figures, and we make no manufacturer authorization claim.
Questions
Whole-House Filtration questions
Will whole-house filtration also give me better drinking water?
It often improves taste and odor at every tap, but it does not do what a reverse osmosis system does. Many households combine point-of-entry filtration with a dedicated drinking-water system at the kitchen sink.
Does it soften hard water?
No. Reducing chlorine and sediment is different from removing hardness minerals. Softening and conditioning are separate decisions with separate equipment.
How is the system sized?
Sizing is based on peak flow demand and the treatment stages required, not on square footage alone. Fixture count, irrigation and occupancy all matter.
Do I need testing first?
You need enough information to select equipment responsibly. For municipal supplies that often begins with the utility's annual water quality report; for wells, appropriate laboratory testing is the practical starting point.
Let's find the right starting point for your water.
Tell us about the property and what you have noticed. We will confirm the water supply, explain what information is needed, and outline suitable options in writing.